Lesson 8 · 1:27

Sketch

Add the sketch of the four-unit building: answer Sketch or Floor Plan Provided, pick the measurement standard, and drag the sketch from the Files panel into the report.

Watch this lesson in DataMasterSign in to your DataMaster account to watchSketch — UAD 3.6 Multi-Family Report

Transcript

Sketch

The Sketch section holds a sketch or floor plan of the dwelling and any outbuildings, and the standard it was measured to. Open it from the section list.

Provided

Sketch or Floor Plan Provided is the one question that's always required. We uploaded the sketch with the assignment's files, so answer Yes, and two more fields appear. Measurement Standard is how the areas were measured: ANSI, AMS, or Other, for example when state law requires a different standard. This building was measured to ANSI, so choose ANSI. Any ANSI declarations the measurements need go in Sketch Commentary. We don't have any, so it stays empty.

Add the image

The sketch goes in this gallery. It's already in the report's files, so open Files from the right-hand rail. Search for the sketch, and drag it from the panel onto the gallery. The type tells the report how to caption the image: Sketch, or Floor Plan. Ours came from sketch software, so Sketch is right. This is the building's own sketch: two floors, each with two units side by side, 2,545 square feet of living area in all, over an unfinished basement of about 1,270 square feet. We'll split that living area among the four units in Unit Interior.

Dwelling Exterior

That completes the Sketch section. Next, Dwelling Exterior.